3 visitsHow to Install an Inground Basketball Hoop
1. Preparation
Tools: Tape measure, level, shovel, wrench set, concrete, steel bars, sand and gravel.
Site requirement: Keep away from buildings and power lines; reserve enough safe space around the court.
Standard height: Basketball rim top **3.05m** official standard.
2. Dig the Foundation Hole
Recommended hole size: **60cm × 60cm × 80–100cm**
Compact the bottom, lay 10cm gravel for drainage.
3. Place Embedded Base
Put the embedded pole base into the hole center.
Adjust with a level to keep it perfectly horizontal.
Fix temporarily with steel bars to avoid tilting.
4. Pour Concrete
Use C25/C30 concrete to fill the hole.
Vibrate concrete to remove air bubbles.
Smooth the top flush with the ground.
Curing time**: 7–10 days (do not hit or use during curing).
5. Assemble Main Pole & Backboard
1. Install and fasten the main pole with bolts.
2. Mount the support bracket on the pole.
3. Fix the backboard firmly, keep it vertical and level.
6. Install Rim & Net
Attach the basketball rim to the standard position of the backboard.
Tighten all bolts with lock washers.
Hang the basketball net.
7. Final Adjustment
Check overall verticality and height again.
Fasten all screws completely.
Clean the construction site.
